Ikegami CCU-430, Operation Manual

Page: 162 / 264

144 UHK-430/CCU-430 1710 VER2 (E)
6.3 Setting of CCU Menu
6.3 Setting of CCU Menu
Explains the CCU menu item operating of OCP-MCP-300 and CCU front side.
■ Setting of PRESET FILE
/RDGVWKHGDWDRI35(6(7¿OHIURPWKHLQWHUQDOPHPRU\
όόόᴾ ᵫᵣᵬᵳ ᴾ όόόᴾ
Ṵᴾ
ᵧᵬᵤᵭᵰᵫᵟᵲᵧᵭᵬ ᴾ
ᵮᵰᵣᵱᵣᵲᴾᵤᵧᵪᵣᴾᵪᵭᵟᵢ ᴾ
ᵦᵟᵣᵢᴾᵫᵣᵬᵳ ί ᵢᶇᶑᶎᶊᵿᶗ ᴾᵭᵤᵤ ὸ ᴾ
ᵱᵷᵱᵲᵣᵫᴾᵱᵣᵲᵲᵧᵬᵥᴾᵆᵏᵍᵐᵇ ᴾ
ᵱᵷᵱᵲᵣᵫᴾᵱᵣᵲᵲᵧᵬᵥᴾᵆᵐᵍᵐᵇ ᴾ
Ṷᴾ
ᴾ
ᵮᵰᵣᵱᵣᵲᴾᵤᵧᵪᵣᴾᵪᵭᵟᵢ ᴾ
ᴾ
ᵤᵧᵪᵣᴾᵱᵣᵪᵣᵡᵲ
ᴾ ᴾ
ᵪᵭᵟᵢᴾᵱᵲᵟᵰᵲ ᴾ
ᵮᵳᵱᵦᴾᵱᵣᵲ ḵᵱᵲᵟᵰᵲ ᴾ
ᴾ
Ṵ
Ṵ
Move to the flashing cursor
to "PRESET FILE LOAD"
and confirm.
The submenu "PRESET
FILE LOAD" is displayed.
Main menu s creen Sub menu s creen
PRESET FILE Setting Menu
Menu Initial setting Setting value Description, Remarks
PRESET FILE LOAD
Preset file load
―
FILE SELECT
(1*,1((5
(1*,1((5 6HOHFWVWKH(1*,1((5ILOH
(1*,1((5 6HOHFWVWKH(1*,1((5ILOH
(1*,1((5 6HOHFWVWKH(1*,1((5ILOH
)$&725< 6HOHFWVWKH)$&725<ILOH
― FILE SELECT
5($'<
5($'< 'DWDWUDQVIHU/2$'EHIRUHH[HFXWLRQ
67$57 'DWDWUDQVIHU/2$'VWDUW
&$16(/ 'DWDWUDQVIHU/2$'FDQFHOODWLRQ
PUSH SET ---> START
CAMERA MENU Displays "Camera Power OFF" when the power of camera is turned off.
1
Set the blinking cursor to FILE SELECT and select a target file to transfer (LOAD) the data.
:KHQWKHEOLQNLQJFXUVRULVPRYHGWR/2$'67$57DQG¿QDOL]HGWKHPRGHVHWYDOXHFKDQJHVIURP5($'<WR
67$57
2
- When "CANCEL" is selected, the setting is canceled, and the status returns to "READY" status.
- When "START" is selected, "PUSH SET ---> START" is displayed at the lower section of the screen. When
"START" is selected, proceed to Step 3.
3
While "PUSH SET ---> START" is selected, finalize the operation. The data transfer (LOAD) starts.
:KHQORDGLQJRIWKH¿OHFRPSOHWHVWKHPHVVDJH)$,/6$)('$7$/2$'&203/(7('DSSHDUVRQWKHVFUHHQ7KHQ
CCU re-start automatically, and the operation completes.
ᴾ
ᵮᵰᵣᵱᵣᵲᴾᵤᵧᵪᵣᴾᵪᵭᵟᵢ ᴾ
ᴾ
ᵤᵧᵪᵣ ᴾ ᵱᵣᵪᵣᵡᵲ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾᵣᵬᵥᵧᵬᵣᵣᵰ
ᵋᵏᴾ
ᵪᵭᵟᵢᴾᵱᵲᵟᵰᵲ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾ ᴾᵰᵣᵟᵢᵷ ᴾ
ᵮᵰᵣᵱᵣᵲᴾᵤᵧᵪᵣᴾᵪᵭᵟᵢ ᴾ
ᴾ
ᵤᵧᵪᵣ ᴾᵱᵣᵪᵣᵡᵲ ᴾ ᴾ ᴾᵣᵬᵥᵧᵬᵣᵣᵰ
ᵋᵏᴾ
ᵪᵭᵟᵢᴾᵱᵲᵟᵰᵲ ḵᵱᵲᵟᵰᵲ ᴾ ᴾ
ᴾ
ᵮᵳᵱᵦᴾᵱᵣᵲ ḵᵱᵲᵟᵰᵲ ᴾ
ᴾ
ᵮᵰᵣᵱᵣᵲᴾᵤᵧᵪᵣᴾᵪᵭᵟᵢ ᴾ
ᴾ
ᵤᵧᵪᵣ ᴾ ᵱᵣᵪᵣᵡᵲ ᴾ ᴾ ᴾ ᵣᵬᵥᵧᵬᵣᵣᵰ
ᵋᵏᴾ
ᴾ
ᵤᵟᵧᵪ ὼᵱᵟᵤᵣᴾᵢᵟᵲᵟᴾᵪᵭᵟᵢᴾ
ᵡᵭᵬᵮᵪᵣᵲᵣᵢ
ᴾ
Ṵ
Ṵ
Ṵ
Move to the flashing cursor to
"LOAD START" and confirm.
When "START" is selected, the
message is displayed in the
bottom of the screen.
"FAIL-SAFE DATA LOAD
COMPLETED" is displayed in
the middle of the screen, and
then restart.
Sub menu s creen Sub menu s creen Item s etting s creen