Ikegami CCU-430, Operation Manual

Page: 161 / 264

143 UHK-430/CCU-430 1710 VER2 (E)
6.2 CCU Menu Configuration and Contents
CCU SETTINGS and ADJUSTMENT
6
■ CONFIGURATION
Set the external connection etc..
[ETHERNET SETUP] [PGM NO.] [POWER CONTROL] etc.
Setting Item Initial setting Setting value Description, Remarks
ETHERNET SETUP Set the ETHERNET
― IP ADDRESS 192.168. 1.100
― SUBNET MASK
―
DEFAULT GATE WAY xxx.xxx.xxx.xxx
― SPEED/DUPLEX
$8721(*27,$7,21
$8721(*27,$7,210+$/)
0)8//0+$/)0
FULL
SET
5(%227&$1&(/
5(%227&$1&(/5(%227
EXECUTE
PGM NO. Sets the program number.
― CAM PGM NO. SET OFF OFF, 1 to 99 Sets the ID display number for the entire CCU front side.
FRONT ID DISPLAY OFF OFF / ON Sets the ON/OFF of the display for the entire CCU front side.
POWER CONTROL
― OCP CAM PWR CTRL ---
212))/$67
Selects the operation mode based on the status of the OCP
camera power switch.
― CAM CODE ---
1250$/&87 2SWLRQE\UHJLRQ86$RQO\
SAFETY&H.PWR ---
1250$/&87
FIBER SINGLE MODE OFF OFF / ON Sets the fiber single mode.
ENGINEER SET FILE RENEW
8SGDWHVWKH(1*,1((56(7),/(
― PASSWORD **** Inputs the password for updating.
― 0123456789
― FILE SELECT
(1*,1((5
(1*,1((5(1*,1((5
(1*,1((5
―
DATA RENEW MODE
PUSH SET --> RENEW
PASSWORD ENTRY
6HWVWKHSDVVZRUGIRUXSGDWLQJWKH(1*,1((56(7),/(
― INPUT
****
,QSXWWKHFXUUHQW3$66:25'
The initial value is 0000.
― RENEW ****
1HZ3$66:25'
― CONFIRM **** Reconfirm
123456789
FIRMWARE UPDATE Updates the firmware.
― MAIN SOFT 6149Vxx.xx.xx
― ALL UPDATE
6182Vxx.xx.xx
― SUB SOFT 6139Vxx.xx.xx
― HD VP FPGA2 6091Vxx.xx.xx Displays "---" when the optional module is not implemented.
― HD VP FPGA3 6093Vxx.xx.xx Displays "---" when the optional module is not implemented.
― TRX VP FPGA1 6089Vxx.xx.xx
―
TRX VP FPGA2 6090Vxx.xx.xx
― TRX VP FPGA3 6093Vxx.xx.xx
― RET PRC FPGA1 6102Vxx.xx.xx
―
RET PRC FPGA2 6103Vxx.xx.xx
― PLS/AUX FPGA
9[[[[[[
― MPU FPGA 6117Vxx.xx.xx
12G OUT FAGA
6128Vxx.xx.xx Displays "---" when the optional module is not implemented.
USB DATA SAVE Collects the log data.
― LOG DATA
',$* ',$*6:&17/0(18$//
PUSH SET --> SAVE
OTHERS
― PM TALLY SEL
< <&200 6HOHFWV<7$//<287RU&2007$//<287
― REM OPT ALARM LEVEL
$77(1 $77(1:$51,1*1*
Sets the optical receiver level of the optical alarm on the
remote panel.
REAR FAN SPEED
)$67 )$670,''/(/2:
Sets the rotating speed of the fan motor on the back side of
CCU.