Ikegami CCU-430, Operation Manual

Page: 24 / 264

6 UHK-430/CCU-430 1710 VER2 (E)
1.3 Operating Systems
1.3 Operating Systems
This product is equipped with interface functions with a control panel and control unit.
,WVXSSRUWVYDULRXVRSHUDWLRQIRUPVLQWKHVWXGLRRU¿HOGDVDV\VWHPFDPHUDZLWKWKH
combination of SE-U430 System Extender.
Each control panel to be connected to the CCU can be selected and operated depending on
the use.
■
Example of Minimum Configuration of System Camera (1 camera, 1 OCP)
CCU OFF
EXT
POWER
FILTER
HEAD
F2
F1
MIC
INCOM/ND
PGM/CC
MENU
VF CHAR
COMM
CAMERA
MONITOR
PM
WFM
OCP
CCU-430
Camera
HD-SDI
CP cable
■ Example of System Camera Configuration (Up to 8 cameras, 1 MCP)
CCU
OFF
EXT
POWER
FILTER
HEAD
F2
F1
MIC
INCOM/ND
PGM/CC
MENU
VF CHAR
CCU
OFF
EXT
POWER
FILTER
HEAD
F2
F1
MIC
INCOM/ND
PGM/CC
MENU
VF CHAR
COMM
CAMERA
MONITOR
PM
OCP
MCP
CCU-430
CSU
PM
WFM
CCU-1
CCU-8
OUT
Camera
CP cable
*1
HD-SDI
HD-SDI
CP cable
PM
OCP
COMM
CAMERA
MONITOR
CCU-430
Camera
Note:
- By combining the Camera with
SE-U430 system expander
(option), it can be mounted as a
full-scale studio camera with 7
RULQFKYLHZ¿QGHUDQGIXOO
studio lens
Note:
For Minimum operating System,
no MCP needed when OCP-300
is used.
If the MCP-300 is used,
(;7(51$/32:(5LV
required. Please refer to the
operation manual of MCP-300 for
WKHVSHFL¿FDWLRQVRIWKHH[WHUQDO
power supply.
Term:
OCP (Operation Control
Panel)
This control panel is used for
normal operation. Typically one
OCP is dedicated to one camera
chain.
Term:
MCP (Maintenance Control
Panel)
This control panel is used for
the maintenance and precise
adjustment of the camera in
studio shooting. By using a
memory card, you can save the
shooting condition on memory
and make setup easily. By using a
CSU together with an MCP, you
can maintain up to 32 cameras.
Term:
CSU (Camera Select Unit)
Used when controlling multiple
cameras. With using a MCP,
one CSU can control up to 8
cameras, and contains terminals
through which video is output
on the monitor from the selected
camera.
Caution:
*1 HD-SDI option must be
installed to monitor using
CSU.