IKEA BEMOTA, Manual

Page: 10 / 20

Product description
6
1
4
2
3
5
1 Upper chimney
2 Lower chimney
3 Hood body
4 LED Lighting
5 Grease filter
6 Control panel
Control panel
BUTTON
FUNCTION
A
Speed
Turns the motor on/off at speed one.
Attention: the product is with the filter alarm disabled.
Press and hold the button for approximately 2 seconds, with all the loads turned off (Motor+Lights), to turn the
grease filter alarm on. LED (B) flashes twice to confirm.
To turn the alarm off, press the button again and hold for at least 2 seconds. The relevant LED (B) flashes once.
B
Speed
Turns the motor on at speed two / Activate charcoal filter alarm.
Attention: the product is with the filter alarm disabled.
Press and hold the button for approximately 2 seconds, with all the loads turned off (Motor+Lights), to turn the
Activated Charcoal Filter alarm on. LED (A) flashes twice to confirm.
To turn the alarm off, press the button again and hold for at least 2 seconds.The relevant LED flashes once (A).
Only for recirculation mode.
C
Speed
Turns the Motor on at speed three / Reset alarm grease filter saturation.
Press and hold the button for approximately 2 seconds, with all the loads turned off (Motor+Lights), to reset the
grease filter saturation alarm or charcoal filter alarm. LED (A) flashes three times.
D
Speed
Turns the motor on at Booster speed.
This speed is timed to run for 6 minutes. At the end of this time, the system returns automatically to the speed
that was set before. If it is activated with the motor turned off, it will switch to OFF at the end of the time. To de-
activate it, press button D or press button A.
E
Light
Press briefly: Turns the lighting system on and off at maximum intensity.
Press and hold to change the lighting intensity up or down.
ENGLISH 10