Easyfly/PiccoFly
R/C Simulator
(interface cable version)
System requirements
100% Intel-Pentium-compatible processor
with at least 233Mhz (optimum pentium II 300
or AMD K6-300 or better), 32MB RAM
(optimum 64MB), 20MB free hard disc
memory, CD-ROM drive, Open GL-ICD-com-
patible graphic card with at least 8MB
(optimum 16MB or more). 100% directX
compatible sound card, a free sevial port
(COM port) if you purchase the interface-
version and a trainer output on your trans-
mitter, Windows 95, 98, ME/2000 with directX
version 7.0 or higher. Make sure your
computer matches the following system
requirements before running easyFly. Using
easyFly/PiccoFly on a slower machine than
recommended will result in a non realistic
simulation. During gameplay you can press
the F12 key which will display the frames per
second (fps). Make sure this number is always
greater than 25.
Instructions to the graphics card
Please note
that the 3D graphics card is the
most important component for a smooth
operation of easyFly/PiccoFly.
About 70-90% of all calculations are done on
the graphic card.
A fast processor will therefore not be of much
help without the appropriate graphics card.
Online manual
On the cd in subdirectory \ manual \
easyFly/PiccoFly\ english\ a detailed manual
in html format can be found. A html browser is
required to read the online manual, e.g.
Netscape Navigator.
IKARUS wishes you happy R/C flying.
