17
Selecting the screen resolution
Click on the tool symbol to select the desired
screen resolution, e.g. 800*600 pixels and
click on OK to accept.
Selecting the input device
Click on the R/C transmitter symbol in the initial
screen to select the input device. Select
RADIO and TRANSMITTER as your input
device.
Calibration
If easyFly/PiccoFly says “No device found on
the selected port” repeat the selection. If the
problem still persists switch the computer off
and on with running transmitter. Try both
comports. Temporarily disable or completely
remove device drivers for e.g. modems or
docking stations etc. which could still be active
and block the comports.
