After starting the simulation the
initial
screen
appears:
EasyFly or PiccoFly
(3d addon cards with
Voodoo2 only)
:
Choose this option only, when using a 3D
addon card from 3dfx with a Voodoo2
chip. Do not use this option with Voodoo 3
Starting EasyFly or Picco
Fly
Put the EasyFly or PiccoFly CD into your CD-
ROM drive. To start EasyFly or PiccoFly, first
choose 'Programs' in the start menu of
Windows and then ‘EasyFly’or PiccoFly. Now
select one of the following options:
EasyFly or PiccoFly
Use this option to startEasyFly or PiccoFly for
all standard 3D graphic cards and for Voodoo3
cards and above.
Start der Simulation
Start of simulation
Wahl der Auflösung
Selection of screen resolution
Wahl der Steuerung und Kalibration
Input device selection and
calibration
Programm beenden
Program termination
Wahl der Auflösung
Selection of screen
resolution
Modellauswahl
Model selection
Programm beenden
Program termination
Wahl der Steuerung
und Kalibration
Input device selection
and calibration
Start der Simulation
Start of simulation
