Calibrating the Game
Commander step by step
Win95/98
To use game-commander in the simulator, you
first have to calibrate it. Please go according
the following instructions to calibrate in
Windows-system.
Preparation:
Plug in the 15pol-connector of the game-com-
mander onto the 15-pol-jack of your computer.
The connector has to be plugged in to the end-
stop of the sheet-mental of the game-card.
If your computer has two of such a connector,
you have to deactivate one of it, because your
computer can only support one gameport.
1
)
In“Start”,Adjustments”,“SystemControl”/”Ga
mecontroller” click on “Add...”.
Delete other controller under Start-
/Adjustments/System Control/Game Con-
troller (these can be added again every time
by input of the name without new cali-
bration).
