- 4 -
1.2 Power-On Initial Configuration
1.3 Video Output
1. Power-On: Connect the DC12V power supply adapter with the power supply socket.
2. Initial Configuration: Upon powering on, the remote control receiver light will turn on and start
blinking red. The camera head will move and adjust into the HOME position (intermediate
position of both horizontal and vertical). When the remote control receiver light stops
blinking red, it will stay on and turn green; this means the self-checking is finished.
- Note: After the Power-On self-test is completed If you press “set preset” then “0”, the
camera head automatically moves to the preset HOME position any time you press “0”.
The OTTICA has a variety of video outputs including LAN, HDMI and 3G-SDI.
1. Video Output from LAN
2. HDMI Video Output
3. 3G-SDI Video Output
A. Network Cable Connection Port: No.12 in Figure1.1;
B. Webpage Login:
A. HDMI Video Cable Connection: Refer to No.11 in Figure1.1.
B. Connect the camera and monitor via HDMI video cable.
A. 3G-SDI video cable connection: Refer to No.10 in Figure1.1
B. Connect the camera and the monitor via 3G-SDI video cable
- The OTTICA-4K is set to auto DHCP so you’ll need to connect the camera to devices
that can automatically assign an IP address, such as routers and switches.
- Next, you’ll have to use an IP scanning software to find the camera’s IP address (visit
the OTTICA-4K product page at www.ikancorp.com to find a link to our recommended
software for IP scanning).
- Copy and paste the camera’s IP address and paste it into your web browser’s address
bar and press “Enter” to proceed into the login page.
- Enter the user name “admin” and password “admin” (factory default) and press ”Enter”
to proceed into the preview page.
- If you do not have the latest version of Flash installed, click on the button that says “Get
ADOBE Flash Player.”
- After you’ve installed the latest version of flash, the camera feed should be visible and
you can now perform PTZ control, video recording, playback, configuration, and other
operation.
- NOTE: See chapter 4.1 for more details.
Summary of Contents for OTTICA-4K
Page 6: ...6 Ceiling Mount Steps...