Ikan OTTICA-4K, Manual, Page: 29 / 45

- 29 -
1. Network Port
2. Ethernet Parameters
3. DNS Parameters
- Data port: Set the Data Port. The device will restart automatically after it’s changed
(Default: 3000; Optional: 0-65535).
- Web Port: Set the Web Port. The device will restart automatically after changed (Default:
80; Optional: 0-65535).
- Onvif Port: Set the Onvif Port. The device will restart automatically after changed
(Default: 2000; Optional: 0-65535).
- Soap Port: Set the Soap Port (Default: 1936; Optional: 0-65535).
- RTMP Port: Set the RTMP Port (Default: 1935; Optional: 0-65535).
- RTSP Port: Set the RTSP Port. The device will restart automatically after changed
(Default: 554; Optional: 0-65535).
- Visca Port: Set the Visca Port. The device will restart automatically after changed
(Default: 1259; Optional: 0-65535).
- RTSP Obtaining method: rtsp: // device IP address: 554 / live / av0 (av0 main stream;
av1 secondary stream)
- RTMP Obtaining method: rtmp: // device IP address: 1935 / live / av0 (av0 main
stream; av1 secondary stream)
- DHCP: Enable or disable the option to obtain IP automatically. By clicking on the “Save”
button and rebooting the device, a display saying “Save successful” will be shown.
(Default is set to ON).
- IP Address: You can set the IP Address. By clicking on the “Save” button and rebooting
the device, a display saying “Save successful” will be shown. (Default is now set to
192.168.5.163).
Note: This IP address is the same with the one used to login to the web page..
- Subnet Mask: You can set the Subnet Mask (Default is set to 255.255.5.0).
- Default Gateway: You can set the Default Gateway (Default is set to 0.0.0.0). - Physical
Address: You can set the Physical Address (The parameter is read-only and can not be
modified).
- By clicking on the “Save” button, the configuration will be validated when you see the
display message: “Save successful”
4.2.6 Network Configuration
- Preferred DNS Server: You can set the preferred DNS server (Default is set to 0.0.0.0).
- Alternate DNS Server: Alternate DNS server settings (Default is set to 0.0.0.0).
- By clicking on the “Save” button, the configuration will be validated when you see the
display message: “Save successful”.