IKA MATRIX ORBITAL DELTA PLUS, Manual

Page: 7 / 21

12 13
Installation
/// Connection to the power supply
100 - 240 V ~
50/60 Hz
240 W
IP 21
1.
2.
!
Notice!
The socket used must be earthed (fitted with earth contact)�
Observe the ambient conditions (temperature, humidity etc�) listed under “Technical Data”�
Symbol Designation Function
Lock button symbol Indicate the buttons are locked�
A
(B / C)
Operating mode symbol Indicate the device is in operating mode (A, B or C)�
INT
Intermittent mode symbol Indicate the intermittent mode is activated�
USB connection symbol Indicate the device is communicating via USB�
Timer / Counter symbol
(Tempering) Indicate the "Timer / Counter" start condition is set to:
"Immediately" (see "Tempering" under "Timer")�
Timer symbol
(Tempering) Indicate the "Timer" start condition is set to: "Set
temperature reached" (see "Tempering" under "Timer")�
Counter symbol
(Tempering)
Indicate the "Counter" start condition is set to:
"Set temperature reached" (see "Tempering" under
"Timer")�
Timer / Counter symbol
(Mixing)
Indicate the "Timer / Counter" for mixing�
Mixing symbol Indicate the mixing function is activated�
00:10
Mixing in Intermittent
mode symbol Indicate the mixing function with intermittent mode is
activated�
Tempering (heating)
symbol
Indicate the heating function is activated�
Tempering (cooling)
symbol
Indicate the cooling function is activated�
Fast
(Moderate /
Slow)
Temperatur control rate
symbol Indicate the tempering "Control rate" is set to "Fast
(Moderate or Slow)"�
PC
PC control symbol Indicate the device is controlled by a PC�
PR
Program control symbol Indicate the device is in program control mode�
Power failure symbol Indicate a previous power supply interruption�
IKA ThermoCover Symbol Indicate IKA ThermoCover is attached to the device�
/// Explanation of symbols on the working screen
A
IKA MATRIX 2.0 mL
Fast actual ºC
Set ºC Set rpm
actual rpm
25.0
100.0
300
300
0:00:00
0:00:00
0:10
PC
PC / PR B / C
Note: The symbols displayed change depending on the status and settings of the device�