IKA KS 130 basic Operating Instructions Manual Download Page 2

    2

You have purchased an laboratory machine which meets the highest 
engineering and quality standards.
In accordance with guarantee conditions, the guarantee period is 24 
months. For claims under the guarantee please contact your local dea-
ler. You may also send the machine direct to our works, enclosing the 
delivery invoice and giving reasons for the claim.  You will be liable for 
freight costs.
The warranty does not cover wearing parts, nor does it apply to faults 
resulting from improper use or insufficient care and maintenance con-
trary to the instructions in this operating manual.
If you require servicing, return the appliance in its original packaging. 
Storage packaging is not sufficient. Please also use suitable transport 
packaging.

Vous avez fait l’acquisition d’un appareil de laboratoire , qui répond aux 
exigences les plus élevées de technique et de qualité.
Conformément aux conditions de garantie, la durée de garantie s’élève 
à 24 mois. En cas de recours en garantie, veuillez vous adresser à votre 
fournisseur spécialisé. Vous pouvez également envoyer directement 
l’appareil à notre usine en joignant votre facture et l’exposé des motifs 
de réclamation. Les frais d’expédition sont à votre charge.
La garantie ne s’étend pas aux pièces d’usure et n’est pas valable en cas 
de défauts dus à une utilisation non conforme et un soin et un entretien 
insuffisants, allant à l’encontre des recommandations du présent mode 
d’emploi.
En cas de retour au service après vente, renvoyez l’appareil dans son 
emballage d’origine. Les emballages de stockage ne sont pas suffisants 
pour le renvoi. Utilisez un emballage de transport supplémentaire 
adapté.

Sie haben ein Laborgerät erworben, das in Technik und Qualität höchs-
ten Ansprüchen gerecht wird.
Entsprechend den Verkaufs- und Lieferbedingungen beträgt die 
Garantiezeit 24 Monate. Im Garantiefall wenden Sie sich bitte an Ihren 
Fachhändler. Sie können aber auch das Gerät unter Beifügung der 
Lieferrechnung und Nennung der Reklamations-gründe direkt an unser 
Werk senden. Frachtkosten gehen zu Ihren Lasten.

Die Garantie erstreckt sich nicht auf Verschleißteile und gilt nicht für 
Fehler, die auf unsachgemäße Handhabung und unzureichende Pflege 
und Wartung, entgegen den Anweisungen in dieser Betriebsanleitung, 
zurückzuführen sind.
Senden Sie im Servicefall das Gerät in der Originalverpackung 
zurück. Lagerverpackungen sind für den Rückversand nicht aus-
reichend. Verwenden Sie zusätzlich eine geeignete Transport- 
verpackung.

Gewährleistung

Warranty

Garantie

KONFORMITÄTSERKLÄRUNG  

DE

Wir erklären in alleiniger Verantwortung, dass dieses Produkt den Bestimmungen der 
Richtlinien 2006/42/EG, 2011/65/EU, 2014/30/EU und 2014/35/EU entspricht und mit 
den folgenden Normen und norminativen Dokumenten übereinstimmt:
EN 61010-1, EN 61010-2-051, EN 60529, EN 61326-1 und EN ISO 12100.

DECLARATION OF CONFORMITY   

EN

We declare under our sole responsibility that this product corrosponds to the regulations 
2006/42/EC, 2011/65/EU, 2014/30/EU and 2014/35/EU  and conforms with the stan-
dards or standardized documents EN 61010-1, EN 61010-2-051, EN 60529, EN 61326-1 
and EN ISO 12100.

DÉCLARATION DE CONFORMITÉ    

FR

Nous déclarons sous notre propre responsabilité que se produit est conforme aux régle-
mentations 2006/42/CE, 2011/65/UE, 2014/30/UE et 2014/35/UE et en conformité avec 
les normes ou documents normalisés suivant EN 61010-1, EN 61010-2-051, EN 60529, 
EN 61326-1 et EN ISO 12100.

Summary of Contents for KS 130 basic





















































Reviews: