IKA 10 basic, Operating Instructions Manual

Page: 14 / 48

14
Operating modes A and B
Operating mode A
The device does not restart automatically when power is resto-
red after a power outage.
Operating mode B
The device restarts automatically when power is restored after a
power outage, using the set values, and displays the (Pr) symbol
to indicate that there has been a power outage within a certain
period of time.
Switching between operating modes
To switch between operating modes, switch the device off, then
keep the "Start/Stop" button
(F) depressed and press the "Pow-
er" button (L) .
Accessories
Designation Description
Plate For certain sizes of tubes the side tube fences offer
SH additional safety, so that the tubes cannot fall off
the shaker.
1
1
2
3
Removal / fitting tube fences
The front and back tube fences must be in position when the
device is in operation.
The side tube fences are optional; for certain sizes of tubes the
side tube fences offer additional safety.
Fitting
• Plug in the tube fences (1) .
Removal
• Take the tube fences off (1) .
Fitting / removing the rollers
Removal
• Take the tube fences off (1) .
• Release the roller and pull it out (2) .
• Remove the roller completely (3) .
Fitting
• Fitting is the reverse of removal.
A "click" confirms achievement of the correct position.
Caution! Do not change the tube fences or
rollers whilst the device is in operation!
Stop the device by pressing the "Start/Stop"
button (F). Do not use your hand to stop the
device.
Press the "Power" button (L) to switch the
device off.