SP209 Series User Manual
SP209 / SP209i
Software technical requirements
Download ScanaStudio software on www.ikalogic.com so you can use your device on your favorite
platform. SP209(i) and ScanaStudio were tested to supports the following platforms:
• Windows 7/8/10
• Mac OS 10.9 or later
• Ubuntu 14.04 or later
Ordering information and customer support
For ordering information, please check for nearest distributor on www.ikalogic.com or contact us for
any inquiry at [email protected].
Accessories and maintenance
Accessories and maintenance services (probes replacement) are available on our website:
www.ikalogic.com or by contacting customer support ([email protected]).
Certifications and regulations
This device complies with the following applicable European Directives: Electromagnetic Compatibility
(EMC) Directive 2004/108/EC, Low-Voltage Directive 2006/95/EC, IEC 61326-2.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CAN ICES-3 (B) / NMB-3 (B)
RoHS Compliant 2011/65/EC. This device does not contain any of the substances in excess of the
maximum concentration values (“MCVs”) defined in the EU RoHS Directive.
NOTE
: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
(c) Ikalogic SAS 2019
