SP209 Series User Manual
SP209 / SP209i
• Ensure the USB port used can deliver at least 500mA.
• Try switching to another machine if one is available.
• If all of the above fails, please contact Ikalogic support.
Capturing your first signal
To capture your first logic signals, please follow these steps:
1. Connect the device via USB
2. Launch ScanaStudio and create an SP209(i) workspace.
3. Connect the probes to SP209(i) and to your signals source
4. Ensure the ground probe is connected
5. Check if the status LED is blinking: if it’s the case, it means the some logic changes are already
being detected on the probes.
6. Hit the start button in ScanaStudio and wait until signals are captured.
You can adjust the capture duration by adjusting the number of samples in the device configuration
tab.
Mechanical data
All SP209 series devices casing are manufactured from anodized aluminum, able to withstand heavy
duty usage in various harsh environments. All markings are laser engraved, ensuring important pinout
information is not lost over time.
(c) Ikalogic SAS 2019
