SP209 Series User Manual
SP209 / SP209i
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. IKALOGIC SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT,
INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF DATA, WHETHER ARISING
FROM BREACH OF WARRANTY OR BASED ON CONTRACT, TORT, RELIANCE OR ANY OTHER THEORY. Since
some countries or states do not allow limitation of the term of an implied warranty, or exclusion or
limitation of incidental or consequential damages, the limitations and exclusions of this warranty may
not apply to every buyer. If any provision of this Warranty is held invalid or unenforceable by a court of
competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.
Document Revisions
30-June-2019
Updated safety information section
Added Ordering information and customer support section
Added Accessories and maintenance section
Added Limited warranty & limitation of liability section
04-February-2019
Added SP209i integrated transceivers Manufacturer Part Numbers
Updated T.B.D. parameters for the SP209i CAN transceiver
Added specifications related to the CAN and LIN transceivers
Changed trigger output voltage high level from 5V to 3.3V
01-February-2019
Moved from preliminary to final release.
Fixed spelling error in quick start section
22-November-2018
Fixed error in “What’s in the box” chapter.
Updated trigger OUT and trigger IN specifications.
Updated device weight.
10-October-2018
Initial release of this document.
The information in this document is subject to change without notice.
(c) Ikalogic SAS 2019
