7 CONTACT DATA LOG
The Safe Spacer can work as a proximity alarm and/or a contact
tracing device.
The two features can be anabled or disabled independently.
When contact tracing is active, each device that comes within 2
meters is logged, regardless of the alarm status and the alarm
threshold settings.
The idea is to log the most reliable contact tracing data possible,
independent of distance and/or time thresholds that may change.
It is possible to enable/disable the contact data log via the dedicated
software or command line interface.
• By default, the contact data log is disabled: to turn it ON,
connect the unit to a computer: the Safe Spacer software
can automatically set date and time and turn on contact data
logging. Alternatively, you can use the command line interface
(CLI) to set date and time and then turn contact data logging on
manually.
7.1 ERROR MESSAGES
Once data logging is enabled, it is advisable to download the data
regularly to prevent the internal memory from filling up.
If the internal memory
becomes full, or date and
time are not valid, the Safe
Spacer will blink purple
rapidly every 2 seconds until
the data log is downloaded
or date and time is properly
set.
PURPLE
14