22
10.5 PAIR A NEW S-BRIDGE
With the S-Bridge access point, Safe Spacer data can be collected wirelessly from the field, using the
UWB network, and stored into any Mac/PC computer with a USB port running the Safe Spacer software.
PLEASE NOTE: Safe Spacer software supports only a single S-Bridge setup. Small facilities can place
the S-Bridge at their entry/exit point and use the Mac/PC Safe Spacer software for data monitoring.
To pair a new S-Bridge proceed as follows:
Click on the S-Bridge button located in the top bar of the interface. A simple setup wizard will appear.
Now, plug your S-Bridge with USB to your computer and, once it is detected, click NEXT to proceed.
Now the S-Bridge is paired and ready to collect data from Safe Spacer devices. Place the S-Bridge in the
desired position and adjust the detection range using the slider.
PLEASE NOTE: Some walls or materials can obstruct the signal strength.
Click “Done” to complete the setup process.
