![Iiyama ProLite LH5580S User Manual Download Page 14](http://html1.mh-extra.com/html/iiyama/prolite-lh5580s/prolite-lh5580s_user-manual_624177014.webp)
ENGLISH
12 BEFORE YOU OPERATE THE MONITOR
[USING THE WALL MOUNT OR CEILING MOUNT]
CAUTION
200
200
624
624
200
200
307.
5
411.
5
52
Handles
Protective Sheet
(mm)
Table
Lay the screen face down
Lay the protective sheet on a table, which was wrapped around the monitor when it was packaged,
beneath the screen surface so as not to scratch the screen surface.
This device cannot be used or installed without the Tabletop Stand or other mounting accessory.
Failure to follow the correct mounting procedures can result in damage to the equipment or injury
to the user or installer. Product warranty does not cover damage caused by improper installation.
Failure to follow these recommendations can void your warranty.
For installation, use
M6 screws (with a loose-proof spring washer and having a length 10 mm longer
than the thickness of the mounting bracket) and tighten them securely.
For preventing the monitor from falling:
• Install the monitor with metal brackets for wall or ceiling installation (commercially available) on
your own responsibility. For detailed procedures of installation, refer to the instructions of the metal
brackets.
• To lessen the probability of injury and damage resulting from fall of the monitor in case of
earthquake or other disaster, be sure to consult the bracket manufacturer for installation location.
• To lessen the risk of falling of the monitor, thread commercially available rope through the handles
at the right and left of the monitor and secure the rope to the wall mount brackets or ceiling mount
brackets. Use rope that can bear a load 6 times the weight of the monitor (55” approximately 171 kg; ).
• Do not sleep where the monitor may topple over or fall in case of an earthquake or other disaster.
• Use screws having enough strength to support the LCD display monitor (made of stainless steel etc.).
About the metal bracket:
• Use a VESA-compliant metal bracket.
• Before installation, make sure that the installation surface has sufficient strength.
• Use a metal bracket (commercially available) that is strong enough to hold the monitor.
• Before installation, check the strength and other properties to ensure the safety.
• Do not block the heat dissipating holes in the monitor with the metal bracket. See page 14.
• For details of the mounting procedure and the safe installation procedure, see the user instructions
of the metal bracket (commercially available) to be used.
• Take measures such as using multiple metal brackets, holding the monitor at several points, and
taking measures to prevent falling or dropping in case of a problem.