ENGLISH
BEFORE YOU OPERATE THE MONITOR 11
[TO AVOID THE MONITOR FROM FALLING]
CAUTION
Screw holes
Screw hook, etc.
(commercially available)
Clamper
Screw
Rope, etc.
(commercially available)
400 mm
CAUTION
When installing the monitor using the tabletop stands (option), take measures to prevent the monitor
from falling over in case of an earthquake or other disaster to lessen the probability of injury and
damage resulting from the fall. As shown in the figure, secure the monitor to a solid wall or pillar
using rope (commercially available) strong enough to bear the weight of the monitor. [approximately
30.1 kg (with the optional stands)] When using screw hooks (commercially available), use ring
hooks, not C-hooks (with opening).
• The effect of the fall prevention substantially depends on the strength of brackets and base to
which the fall prevention devices is attached. When you cannot ensure sufficient strength, provide
adequate reinforcement.
• Though the recommended fall prevention is intended to lessen the probability of injury and
damage, it doesn’t assure its effectiveness against any kind of earthquake or disaster.
• Do not sleep where the monitor may topple over or fall in case of an earthquake or other disaster.
• Before moving the monitor, remove the rope that is securing the monitor. Failure to do so may
result in injury or breakdown of the monitor.
