manualshive.com logo in svg

Iiyama ProLite LH4780SB, User Manual

Share
Download
Iiyama ProLite LH4780SB User Manual Download Page 41

ENGLISH

38  OPERATING THE MONITOR

Adjustment Item

Problem / Option                                                      Button to Press

ADVANCED OPTION

FILM MODE*

3,4

IR CONTROL

SCAN 

CONVERSION*

3,4

Select the IP conversion mode.

PROGRESSIVE

INTERLACE

Interlace signals are converted into progressive signals. 

Select this setting for normal cases.

Interlace signals are displayed without being converted. 

Though this setting is suitable for motion images, still 

images aren’t displayed properly.

AUTO

OFF

FILM MODE is turned off.

Images of 24 frames per second are detected, subjected 

to interpolation, and then displayed.

When FILM MODE is AUTO, set SCAN CONVERSION to 

PROGRESSIVE.

NOTE

Lock the remote control.
NORMAL

PRIMARY

SECONDARY

LOCK

All the remote control operations are enabled.
The first monitors of those multiconnected via RS-232C is 

designated as PRIMARY.
The monitors other than the first one multi-connected via 

RS-232C are designated as SECONDARY.
All the remote control operations are disabled.

When you hold down the DISPLAY button on the remote control 

for at least 5 seconds, the NORMAL mode is activated. 

NOTE

UNDERSCAN

SMOOTH MOTION

MODE

Enable the double-speed clear picture function.

Moving images displayed at 60 frames per second are interpolated into 

120-frame-per-second images for smooth and sharp image quality.
OFF
SOFT
HARD

SMOOTH MOTION MODE is turned off.
Interpolated (Typical)
Interpolated (for smoother and sharper image)

Frame interpolation may cause noise and smear. To reduce noise 

and smear, select OFF.

NOTE

Summary of Contents for ProLite LH4780SB

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands