ENGLISH
24 OPERATING THE MONITOR
OPERATING THE MONITOR
To create the best picture, your iiyama LCD monitor has been preset at the factory with the COMPLIANT
TIMING shown on page 52. You are also able to adjust the picture by following the button operation
shown below. For more detailed adjustments, see page 44 for SCREEN ADJUSTMENTS.
Press the MENU Button (Remote Control) or EXIT Button (Back Controller) to start
the On Screen Display feature. There are additional Menu items which can be
switched by using the / Buttons.
Select the Menu item of the adjustment you want to make. Press the SET
Button(Remote Control) or INPUT Button (Back Controller) and enter the menu
page. Then, use the / Buttons to highlight the desired adjustment item.
Press the SET Button(Remote Control) or INPUT Button (Back Controller) again. Use
the + / - Buttons to make the appropriate adjustment or setting.
Press the EXIT Button to leave the menu, and the settings you just made would be
automatically saved.
The EXIT Button can be used to return previous menu item.
Any changes are automatically saved in the memory when the On Screen Display disappears.
Turning off the power should be avoided while using the Menu.
Adjustments for Image Position, Clock and Phase are saved for each signal timing. Except for
these adjustments, all other adjustments have only one setting which applies to all signal timings.
NOTE
For example, to correct for vertical position, select Menu item of Screen. Then, select "V
POSITION" by using the / Buttons.
Use the
+
/
-
Buttons to change the vertical position settings. The vertical position of the overall
display should be changing accordingly while you are doing this.
Press the EXIT Button lastly, it ends, all changes are saved in the memory.
FULL
V POSITION
50
