manualshive.com logo in svg

Iiyama ProLite LH4780SB, User Manual

Share
Download
Iiyama ProLite LH4780SB User Manual Download Page 28

ENGLISH

  OPERATING THE MONITOR  25  

[CONTROL LOCK MODE]

 

Back Controller Button: 

   

 

 

 

 

Pressing and holding the   and   buttons for about 3 seconds when Menu is not displayed, will 

lock/unlock the Back Controller Button Lock function. 

 

 

 

Direct

 

Picture Size: 

Press the SIZE button when Menu is not displayed.

NORMAL:

 Images supplied from external devices such as PC and DVD fit the screen, keeping  

 

their original aspect ratio.

FULL:

 Images are displayed on the entire screen.

DYNAMIC:

 4:3 images are enlarged on the entire screen with non-linearity. (Round images may  

 

be cut when enlarged.)

CUSTOM (ZOOM):

 You can enlarge the displayed images beyond the active display area. The  

 

portions of the image out of the display area aren’t visible.

REAL:

 Images are displayed in their original sizes.

• “DYNAMIC” can be selected for video input (YPbPr, VIDEO, and S-VIDEO).

 

Picture Mode:

Press the PICTURE MODE button when Menu is not displayed.

HIGHBRIGHT:

 The brightness is maximized.

STANDARD:

 Factory default setting.

sRGB:

 Suitable for color matching with sRGB-compliant devices.

CINEMA:

 Suitable for viewing movies.

•  “sRGB”  can  be  selected  for  computer  input  (HDMI1,  HDMI2,  DVI-D,  D-SUB  and 

DISPLAYPORT).

• “CINEMA” can be selected for video input (HDMI1, HDMI2, YPbPr, VIDEO and S-VIDEO).

 

Audio Input Change: 

Press the AUDIO INPUT   /   buttons when Menu is not displayed.

Note that the selectable audio inputs vary depending on the currently selected video signal input.

* Available for Remote Control only. 

Normal size 
of each signal

Recommend   
picture size

Selection of the video signal input Operation
HDMI1 or HDMI2

DVI-D

ANALOG only

D-SUB

ANALOG only

DISPLAYPORT

YPbPr

ANALOG only

S-VIDEO

ANALOG only

VIDEO

ANALOG only

* The audio of HDMI1 or HDMI2 being selected is output as the HDMI audio.

Summary of Contents for ProLite LH4780SB

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands