ENGLISH
BEFORE YOU OPERATE THE MONITOR 9
[ Fitting of Cable Cover ]
Put a piece of soft cloth on the table beforehand to prevent the monitor from being scratched. Lay
the monitor flat on a table with front face down.
Step 1
Cable Hole
Step 2
Hand Screws
Cable Cover
As shown in Step 1, connect the
cables and put them through the
cable hole.
As shown in Step 2, place the cable
cover and fix it firmly with the hand
screws.
ADJUSTING THE VIEWING ANGLE
For optimal viewing it is recommended to look at the full
face of the monitor.
Hold the panel so that the monitor does not topple when
you change the monitor’s angle.
You are able to adjust the monitor’s angle up to 90
degrees upward, 5 degrees downward.
Do not touch the LCD screen when you change
the angle. It may cause damage or break the
LCD screen.
Careful attention is required not to pinch your
fingers or hands into the moving part of the
stand when you change the angle.
NOTE
90°
5°
Summary of Contents for PLT1633M
Page 2: ...ENGLISH ...
