manualshive.com logo in svg

Iiyama LPX100, Maintenance Manual

Share
Download
Iiyama LPX100 Maintenance Manual Download Page 68

-61-

7.5.41 PAL Verification

Conditions:

Display image: PAL video signal color bar, and the image of which area to be

displayed are easy to be identified.

Requirements:

•

 

When 

MAIN MENU

è

SETTING

 is selected, “PAL B, G, H, I” is displayed.

•

 

No jitter, fluctuation, or distortion.

•

 

There are no displacements of the image by which image is not displayed around
the perimeter of the screen.

•

 

The depth of a color and the hue are not very different from the normal values.

Measurement:

Projected image

Adjustment Procedures:

MAIN MENU

è

SETTING

7.5.42 SECAM Verification

Conditions:

Display image: SECAM video signal color bar, and the image of which area to be

displayed are easy to be identified.

Requirements:

•

 

When 

MAIN MENU

è

SETTING

 is selected, “SECAM” is displayed.

•

 

No jitter, fluctuation, or distortion.

•

 

There are no displacements of the image by which image is not displayed around
the perimeter of the screen.

•

 

The depth of a color and the hue are not very different from the normal values.

Measurement:

Projected image

Adjustment Procedures:

MAIN MENU

è

SETTING

Summary of Contents for LPX100










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands