24
Auto Answer
The auto-answer feature of your BoB2™ handset means that an incoming phone call will answer
automatically as soon as the handset is lifted out of the cradle.
1.
Open the Main Menu by pressing the control key
. Scroll down to ‘
Settings
’, then press ‘
OK
’.
2.
Scroll down to ‘
Handset
’, then press ‘
OK
’. Select ‘
Auto Answer
’ and then press ‘
‘OK’
to tick or untick the
box. Auto Answer is active when the box is ticked.
3.
Press the red end call key three times to exit the menus and finish.
Adjusting the volume of your calls
You can set the loudspeaker volume to five different levels and the earpiece volume to three different levels
1.
Press the upper control key
and select ‘
Handset Volume
’, then press ‘
OK
’.
2.
Use the control keys to scroll between earpiece and loud speaker volume and select your volume setting.
You will hear a test tone for each change to loud speaker volume.
3.
Save your changes by pressing the display key below ‘
Save
’.
You can make these volume changes during a call by following the same steps.
Summary of Contents for BOB2
Page 1: ...Handset Manual Internet and Phone in One ...
Page 2: ......
Page 30: ...30 ...
Page 31: ...31 All Done ...
