Configuration
Draco tera IP Gateway
30
7
Configuration
The configuration of the IP Gateway board is saved on the IP Gateway board and is available after installation in
another matrix.
7.1 Configuring IP Gateway Connections
The configuration of IP Gateways and the connection via IP to another IP Gateway is set in this menu. Each IP
Gateway board is internally managed with eight ports for up to eight connections over a 1G channel to establish
connections to another IP Gateway boards or to an IP Gateway extender. To set an IP Gateway connection between
two matrices, it is necessary to configure both matrices.
Fig. 12
Management software menu
System Settings - IP Gateway
7.1.1 Setting an IP Gateway Connection
We strongly recommend setting IP Gateway connections only via Master Matrix.
To set a new IP Gateway connection, proceed as follows:
1. Connect to the Master Matrix.
2. Click
System Settings > IP Gateway
in the task area.
3. Click
Activate Edit Mode
in the toolbar.
4. Click the slot with the IP Gateway board under
Slot
for which an IP Gateway connection has to be set.
