A U T O E M P T Y B A S E T R O U B L E S H O O T
2 0
Flashing red
• Fan error
• Overheating
• Dust collection port is blocked
• The cover is not closed properly
1. Frequent dust collection leads to fan overheating protection or fan
malfunction. It is recommended to try to collect dust after 30 minutes;
2. Clean up the debris in the dust collection port at the bottom of the robot and
in the dust collector;
3. Unplug the dust collector, turn the dust collector over, check whether there
is any foreign matter in the dust duct cover on the bottom, use a screwdriver to
remove the screw and open the dust duct cover to clean the foreign matter.
INDICATOR
DEFINITION
SOLUTION
• The dust bag is not installed
• The dust bag not installed properly
• The Auto Empty Base cover is open
1. Replace with a new dust bag;
2. Check whether the dust bag is installed, if not, please install the dust bag.
3. Check if the dust bag is installed correctly and in place.
4. Make sure that the Auto Empty Base cover is completely closed and sealed
and that the Nova is docked on the Auto Empty Base to charge and auto empty.
5. To manually send the Nova to empty at the Auto Empty Base:
Press the power button on the Nova. After the Nova leaves the Auto Empty
Base press any button on the Nova to pause and then press and hold Home
Button for three seconds, the Nova will return to the Auto Empty Base to
empty. The Nova will charge automatically after auto emptying.
Flashing red
Summary of Contents for Nova iHRV6
Page 1: ...Owner s Guide Model iHRV6 ...
