iHome iPL22 User Manual Download Page 9

Page: 9 / 16

USING THE AUX-IN JACK

1. Connect a standard audio cable with 3.5mm plug to the Aux-in Jack

on the back of the unit and connect the other end to the headphone
or aux-out jack on your audio device.

2. Press the

Power Button

to turn the unit on.

3. Press the

Mode Button

to cycle unit to AUX mode.

4. Control audio playback and navigate tracks and menus on your audio

device.

5. Press the or

Buttons

on the unit to adjust the system volume.

You may need to adjust the volume on your audio device, too.

6. Press the

Power Button

to turn off the unit.

NOTE

: Connecting an already playing device will turn on the unit in Aux

mode, or switch audio playing in iPod or FM mode to Aux mode audio.

L I S T E N I N G T O F M R A D I O

Tuning and Playing the Radio

Extend FM wire antenna fully for best reception. Do not strip, alter or attach to
other antennas.
1. Press and release the

Power Button

to turn on the unit, then press and

release the

Mode Button

as needed to cycle through iPod (Lightning dock),

FM radio and Aux modes.

2. When FM mode is selected, press the

–

Buttons

to tune the radio to a

desired station. The current radio frequency appears on the display. Press
the

–

Buttons

for a few seconds to scan for the next clear station.

To memorize a station as a preset

A. Press the

presets Button

as needed to step through the 6 presets

(P1 - P6) to the number you wish to assign, and then

hold

the

presets

Button

until the current radio frequency begins flashing in the display

and a beep sounds.

B. Press the

–

Buttons

to tune the radio to a desired station. Hold briefly

to have the radio autoscan/search for the next clear station.

C. Press the

presets Button

to confirm the setting, two confirmation

beeps will confirm the setting and the preset number you wish to assign.
Repeat steps A-C to preset up to 6 stations.

4. To listen to a preset station, use the

Mode Button

to select FM mode, then

press the

presets Button

to choose the desired preset.

5. Press the or

Button

on the unit to adjust the system volume.

REVIEWING AND RESETTING THE ALARM

Press and release the

Alarm Button

at any time to review the current alarm

settings. While reviewing, press and release the

Alarm Button

to toggle

the alarm on or off. When the alarm icon is displayed, the alarm is armed/on.
Press the

Power Button

Alarm Button

when the alarm is sounding to

reset it to come on again at the same time the next day. Press the

Alarm Button

again to turn off/disarm the alarm. The alarm icon will

disappear.

CHARGING YOUR iPHONE OR iPOD

The Lightning dock on the unit is designed so you can dock your iPhone

or iPod without having to remove most cases or “skins”. However,
some thicker cases may interfere with proper docking and should be
removed if your device does not charge or play music while docked.

1. Gently dock your iPhone or iPod into the flexible Lightning dock

located on the top of the unit

While your iPhone/iPod is docked in the unit the unit is connected to
AC power, it recharges (until fully charged). The unit will not
overcharge your iPhone/iPod.

Note:

Please make sure your iPhone/iPod is properly docked into the unit.

Failure to do so may damage your iPhone/iPod.

LISTENING TO YOUR iPHONE/iPOD

USING THE LIGHTNING DOCK

1. Dock your already playing iPhone/iPod. The unit will automatically

turn on and you will hear the music playing from your iPhone/iPod.
The iPod Icon will appear at the right side of the display, indicating
iPhone/iPod playing mode. Docking a playing device will switch the
unit to iPod mode automatically if unit is in FM or Aux mode.

2. Press the or

Buttons

on the unit to adjust the system volume.

Note:

If the volume is too low on the iPhone/iPod, the unit may not

detect that the iPhone/iPod is in play mode. Press the

presets

Button

to play it. Press again as needed to pause and resume play.

3 Press the

–

Buttons