S L E E P M O D E
Sleep mode lets you sleep to your playing docked iPhone or iPod or to FM
radio. Press the
Sleep Button
as needed to cycle to the desired sleep
duration: 120, 90, 60, 30 or 15 minutes or OFF (turns unit off). Press the
or
Button
on the unit to adjust sleep listening level. The unit will
revert to normal volume level when sleep mode ends. Press the
Sleep
Button
during sleep to view the remaining sleep time; press again to set
sleep to next (lower) sleep duration.
M A I N T E N A N C E
• Place the unit on a level surface away from sources of direct sunlight or
excessive heat.
• Protect your furniture when placing your unit on a natural wood and
lacquered finish. A cloth or other protective material should be placed
between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water.
Stronger cleaning agents, such as Benzene, thinner or similar materials can
damage the surface of the unit.
10
USING THE UNIT IN OTHER COUNTRIES
Different regions of the world use different FM radio frequency steps and
ranges. You will need to select the one that matches the standards in your
region (USA, EUROPE, JAPAN, AUSTRALIA, or CHINA). The default setting is
USA; if you live in the US, you may skip this section.
1. Press and release the
Power Button
to turn on the unit, then press and
release the
Mode Button
as needed to cycle to FM radio mode.
2. Press and hold the
Mode Button
for about 3 seconds until the region
flashes in the display and a beep sounds.
3. Press
the
+
or
–
Buttons
as needed to set the display to your region: USA,
EU (Europe), JPN (Japan), AUS (Australia), or CHN (China).
2. Press and release the
Mode Button
(or no button within 10 seconds) to
exit the radio frequency setting mode. Two beeps will confirm radio
frequency setting.
S N O O Z E / D I M M E R O P E R AT I O N
1. To program a custom snooze duration, during normal operation (when
alarm is not sounding) press and hold the
Snooze/Dimmer Button
until
the display flashes, then press the
+
and
– Buttons
on the unit to adjust
the snooze time to 1 - 29 minutes.
2. Press the
Snooze/Dimmer Button
on the iPL22 after the alarm sounds.
The alarm will be silenced and will come on again in about 9 minutes
(default). You may repeat this cycle several times during the one hour
alarm cycle.
3. During normal operation (when alarm is not sounding), press the
Snooze/Dimmer Button
to control the brightness of the display from
High to Low and to turn the display off.
9
