2
iP18 Quick Start
iPod touch 2G
insert 16
iPod touch 2G/3G
iPhone 4
insert 19
Use this insert
For this
iPhone / iPod
nano 6G/touch 4G
insert 20
nano 6G/
iPod touch 4G
2: inserts
Insert your iPhone/iPod on to the dock. After a
moment the unit will attempt to Auto Sync
the clock on the unit to the time on your
iPhone or iPod. “SYNC AUTO” will appear on
the display, followed by “SYNCED” and 2
beeps. If “FAIL” appears and a long beep
sounds, try again with a different iPhone/iPod
or set time manually (see page 4).
Select the dock insert for your
iPhone/iPod model from the table
below and place insert in dock.
To remove insert, place
thumbnail in slot and gently pull
upwards.
1: power
RESETRESET
TESTTEST
Dock a playing iPhone or iPod to turn on the unit. After
a moment you will hear your music. Press the
Button
to play a docked iPhone or iPod. Press the
Button
again to pause play. Your iPhone or iPod
will charge while docked.
Press and release the
Color Button
as needed to
cycle through color mode settings. In
Fast
color
change mode, press and release the
Color Button
when a specific color is showing to select that color.
Note: An insert provides the best stability and
safety for your iPhone/iPod, but you can safely
dock your iPhone or iPod without an insert,
provided you always do so with care. If you prefer
to use an insert and don’t have one for your model,
please visit www.ihomeaudio.com or call iHome toll
free at 800-288-2792 to purchase one.
4: iPhone/iPod
3: auto sync
color
sleep
time
snooze / d
immer
5: color change
iPhone 4
Attach AC adaptor cable to
adaptor jack on back of the iP18
and plug the other end into a
wall socket to play and charge
iPhone/iPod
. Remove the tab
from the battery backup
compartment.