Setting up the Antenna
Extend the FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
1. Press and release the
radio/aux Button
as needed to cycle through FM radio and Aux-in modes.
2. When FM mode is selected, press the
+
or
– Button
to tune the radio to a desired station. The current radio frequency
appears in the lower part of the display. Press and hold the
+
or
– Button
for a few seconds to scan for the next clear
station.
3.
To memorize a station as a preset
:
A.
Press
the
presets Button
as needed to step through the 6 presets (P1 - P6) to the number you wish to assign,
and then hold the
presets Button
until the selected preset number begins flashing in the display and 1 beep
sounds.
B.
Press
the
+
or
– Button
to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the
next clear station.
C.
Press
the
presets Button
to confirm the setting, two confirmation beeps will confirm the setting and the preset
number you wish to assign. Repeat steps A-C to preset up to 6 stations.
4. To listen to a preset station, press the
presets Button
to choose the desired preset.
5. Press the or
Button
on the unit to adjust the system volume.
5
At the set time, the alarm will sound for 1 hour. If waking to Aux-in, make sure your device is connected to the aux-in audio cable
and has an hour of music in it or is set to repeat.
1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and release the
Button
.
The alarm sound will stop but the alarm icon will remain in the display, indicating the alarm is armed. To turn off
the alarm without resetting it for the next day, press and release the
Alarm Button
.
2. Press and release the
Alarm Button
during normal operation (alarm is not sounding) as needed to arm the alarm (alarm
icon is present) or to cancel it (no alarm icon).
3. Press and release the
Snooze Button
while alarm is sounding to temporarily silence the alarm for the set snooze time
(default is 9 minutes). To adjust the snooze time: press and hold the
Snooze Button
during normal operation. The
snooze time will flash on the display and 1 beep sounds. Press the
–
or
+ Button
to adjust the snooze time from 1 - 29
minutes. Press and release the
Snooze Button
again (or no button within 10 seconds). Two beeps will sound to confirm
snooze setting and return unit to normal operation.
Operating the Alarm
Listening to FM Radio
Page 8
