Listening to other portable audio devices
Using the Unit in Other Countries
6
You can play an MP3 player or other portable audio device through the iDL43 via the Aux-in Jack.
1. Plug one end of a 3.5mm stereo audio cable (
available at http//:www.ihome.com
) into the headphone or line-out jack
on your device and the other end of the patch cord into the iDL43 Aux-in Jack, located on the back of the unit.
2. Press and release the
Mode Button
as needed until “AUX-IN” appears in the lower part of the display, indicating Aux-in
playing mode.
3. Turn on and play your device.
4. Press the
or
Button
on the unit to adjust the system volume. You may need to adjust your device volume, too.
Remember to turn off your device when you are done playing it.
Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that
matches the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA, or CHINA). The default setting is USA; if you
live in the US, you may skip this section.
1. Make sure the unit is OFF (not playing in any mode). Press and hold the
Mode Button
for about 5 seconds until “Radio
USA” appears in the lower part of the display and a beep sounds. Press and release the
+
or
– Button
to set “USA”
to your region.
2. Press and release the
Mode Button
again (or no button within 10 seconds) to exit the radio frequency setting mode.
Two beeps will confirm radio frequency setting.
P8
Sleep Operation
Sleep mode lets you sleep to whatever is currently playing (iPad/iPhone/iPod or the radio), gradually lowering the volume
until the unit shuts off at the selected time.
1. Press the
Bedtime/Sleep Button
to enter sleep mode. The current sleep time will appear on the display.
2. You can adjust the sleep timer from 120, 90, 60, 30, 15 minutes or OFF turns unit off) by pressing the
Bedtime/Sleep
Button
again.
3. When the display changes back to show the real time, pressing the
Bedtime/Sleep Button
once will show the sleep
time remaining. Pressing it again will change sleep time to next lowest increment.
4. iDL43 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the
alarm volume. Press the or
Button
on the unit to adjust the system sleep volume. The sleep volume will remain
at that level the next time you enter sleep mode until controls are changed.
5. To stop listening at any time, press the
Power Button
on the unit to turn it off.
3.
To memorize a station as a preset
:
A.
Press
the
Radio Presets Button
as needed to step through the 6 presets (P1 - P6) to the number you wish to
assign, and then hold the
Radio Presets Button
until the selected preset number begins flashing in the display and
a beep sounds.
B. Press the
+
or
– Button
to tune the radio to a desired station. Hold briefly to have the radio autoscan/search for the
next clear station.
C.
Press
the
Radio Presets
Button. Two beeps will confirm the station is assigned to the preset number you selected.
Repeat steps A-C to preset up to 6 stations.
4. To listen to a preset station, press the
Radio Presets Button
to choose the desired preset.
5. Press the or
Button
on the unit to adjust the system volume.