P10
9
Snooze/Display Dimmer Button
1. To program Snooze, press and hold the
Snooze/Display Dimmer Button
for 2 seconds
during normal operation (when no alarm is sounding). A beep will sound.
2. Press the or
Buttons
to select the desired snooze time (between 1 and 29 minutes).
3. Press and release the
Snooze/Display Dimmer Button
to confirm Snooze setting. 2 beeps
will sound.
4. While the alarm is sounding, press and release the
Snooze/Display Dimmer Button
to
temporarily silence the alarm for the set duration (9 minutes is the default). Snooze can be
used several times during alarm.
5. To adjust the brightness of the display, press and release the
Snooze/Display Dimmer
Button
during normal operation (when no alarm is sounding) to cycle through the
brightness display settings, including turning the display off. When the unit is powered on
it will always default to the high (brightest) display setting.
Sleep Mode
This unit allows you to sleep to the current sound source for a set time before turning the unit off.
1. To set Sleep time, press and release the
Sleep/Clock Adjust Button
as needed to cycle to
the desired sleep duration: 120, 90, 60, 30 or 15 minutes or OFF (turns the unit off).
2. Press the or
Buttons
to adjust the sleep volume on the unit. Note that the sleep volume
setting is stored separately from other volume settings.
FM Radio
Extend the FM antenna for best reception.
1. Press and release the
FM Presets Button
. The current FM radio frequency appears on the
display.
2. Press the or
Buttons
to tune the radio to the desired station (hold to scan for the next
clear station).
3. Press the or
Buttons
to adjust the volume on the unit.
4. When you are through listening, press the
Power Button
to turn the unit off.
Using the
iBT233
