P8
7
Setting the Clock
1.
Press and hold
the
Time Set Button
located on back of the unit for 2 seconds until the
clock display flashes and a beep sounds.
2. Press the or
Buttons
to adjust the clock to the current time (hold for rapid setting).
Make sure you set the correct AM/PM time. The PM indicator appears to the left of the
display; there is no AM indicator.
3. Press the
Time Set Button
to confirm the time. The year will flash on the display.
4. Press the or
Buttons
to adjust the clock to the current year (hold for rapid setting).
5. Press the
Time Set Button
to confirm the year. The month will flash on the display.
6. Press the or
Buttons
to adjust the clock to the current month (hold for rapid setting).
7. Press the
Time Set Button
to confirm the month. The date will flash on the display.
8. Press the or
Buttons
to adjust the clock to the current date (hold for rapid setting).
9. Press the
Time Set Button
to confirm the date and exit clock setting mode. 2 beeps will
confirm clock setting is complete.
TIP:
To toggle the clock display between standard 12 hour time and 24 hour (“military”) time
display, press the
Alarm Button
or
Alarm Button
while the display is flashing during clock
setting.
Setting and Using the Alarms
This unit features dual alarms which can be set to different times and alarm sources. Each is set
in the same way. Instructions are given as “Alarm Button”; use
Alarm Button
or
Alarm
Button
to set respective alarms.
Note
: Each step must be completed while display is flashing or step will time-out with any
changes saved.
Using the
iBT233
