MAINTENANCE
9VX3
LONG TERM STORAGE
Before Storage
To protect the cylinder rods, set the machine position in the right
illustration.
(To prevent the cylinder rods from being rusted )
To store the machine from long term, follow the next procedures.
• Clean parts of the machine and store indoors.
If you have to place the machine outdoors, choose a flat place
and cover the machine.
• Be sure to perform fill the fuel, lubrication, and oil change.
• Apply grease on the exposed part of the hydraulic cylinder piston
rods.
• Store the battery after move the negative terminal and covering it
or dismounting the battery from the machine.
• Lock the control levers and pedals with the lock lever and pedal
lock.
Bucket position at the time of
long term storage.
During Storage
A W A R N IN G
If you have to operate the machine indoors to prevent rust,
keep good ventilation and gas poisoning by window or entrance.
During storage, operate the machine once a month to maintain
films of oil at the lubrication section and charge the battery at the
same time.
■ After Storage
After long term storage, follow the next procedures before operating
the machine.
• Wipe away grease on the hydraulic cylinder rods.
• Be sure to perform fill the fuel and lubrication.
4 - 1 2 - 1
Summary of Contents for 9VX3
