MAINTENANCE
9VX3
DAILY MAINTENANCE AND CHECKS
Check the Engine Oil Level
f ! l CAUTION!
* Check the oil level with the engine stopped.
DO NOT
check
the oil level with engine running.
* DO NOT
overfill the crankcase to avoid engine damaged.
Engine damage can result.
* NEVER
operate the engine when oil level is above
MAX
or
MIN
marks.
1. Place the machine on level ground. Stop the engine.
2. Remove the oil level gauge ® and wipe it clean. Insert oil level
gauge ® , then remove it again to read actual oil level. Install oil
level gauge ® .
3. Maintain the oil level to the
MAX
mark on the oil level gauge © .
Add oil if necessary.
4. Remove the oil fill plug
©
and add oil.
Clean and install the oil fill plug
®.
5. Close the access door.
Check the Coolant Level
AW ARNING
Steam generated by hot fluid under pressure in radiator can
cause personal injury.
Remove filler cap only when cool enough to touch with bare
hand.
©
Fill plug
® ОД level gauge
/
\
® О Д level g a u ge
j
MAX'"
MM"
1. Open the access door on the rear of the machine.
2. Always check the coolant level in the reserve tank. Maintain the
coolant level between the
MAX
and
MIN
marks on the reserve
tank.
3. Remove the coolant fill cap © and add the coolant if necessary.
4. If the reserve tank is empty, check the radiator level with the
engine stopped. Add coolant to the radiator and the reserve
tank.
5. Close the access door.
© Coolant
4 - 5 - 1
Summary of Contents for 9VX3
