iHerz iTop, Manual, Page: 22 / 22

22
810 800-960 GSM
800/900,
TETRA
800,
iDEN
820,
CDMA
850, LTE
Band 5
Pulse
modula-
tion b)
18Hz
2 0.3 28
870
930
1720 1700-
1990
GSM
1800;
CDMA
1900;
GSM
1900;
DECT;
LTE Band
1,3,4,25;
UMTS
Pulse
modulation
b)
217Hz
2 0.3 28
1845
1970
2450 2400-
2570
Bluetooth,
WLAN,
802.11
b/g/n,
RFID
2450,
LTE
Band 7
Pulse
modulation
b)
217 Hz
2 0.3 28
5240 5100-
5800
WLAN
802.11
a/n
Pulse
modula-
tion b)
217 Hz
0.2 0.3 9
5240
5785
NOTE If necessary to achieve the IMMUNITY TEST LEVEL, the distance between the transmit -
ting antenna and the ME EQUIPMENT or ME SYSTEM may be reduced to 1 m. The 1 m test
distance is permitted by IEC 61000-4-3.
a) For some services, only the uplink frequencies are included.
b) The carrier shall be modulated using a 50% duty cycle square wave signal.
c) As an alternative to FM modulation, 50% pulse modulation at 18 Hz may be used because
while it does not represent actual modulation, it would be worst case.
The MANUFACTURER should consider reducing the minimum separation distance, based on
RISK MANAGEMENT, and using higher IMMUNITY TEST LEVELS that are appropriate for the
reduced minimum separation distance. Minimum separation distances for higher IMMUNITY
TEST LEVELS shall be calculated using the following equation:
E=
Where P is the maximum power in W, d is the minimum separation distance in m, and E is the
IMMUNITY TEST LEVEL in V/m.