10
Setting the Date and Time
It is important to set the clock before using your blood pressure monitor, so that a time
stamp can be assigned to each record that is stored in the memory. (The setting range
of the year :2019—2057 time format:12 H/24H)
1.
When the monitor is off, hold pressing “USER” for 3 seconds to enter the mode for
year setting. Or when the monitor is off, press “USER” button shortly, it will display the
time. Then hold pressing “USER” button to enter the mode for year setting.
2.
Press the “MEM” to change the [YEAR]. Each press will increase the numeral by one
in a cycling manner.
3.
When you get the right year, press “SET” to set down and turn to next step.Repeat
steps 2 and 3 to set the [MONTH] and [DAY].
4.
Repeat steps 2 and 3 to confirm the time format [12H] and [24h].
5.
Repeat steps 2 and 3 to set the [HOUR] and [MINUTE].
6.
Repeat steps 2 and 3 to set the [UNIT].
7.
After the unit is set,the LCD will display “donE”first,then display all the settings you
have done and then it will turn off.
MEASUREMENT PROCEDURE
ATTENTION
• Find time to relax by sitting in a quiet atmosphere for some time before measurement.
•
Be seated with your feet flat on the floor, and don’t cross your legs. Place palm upside
in front of you on a flat surface such as desk or table. The middle of the cuff should be
at the level of the right atrium of the heart.
•
Efforts by the patient to support the arm can increase the blood pressure. Make sure
you are in a comfortable, relaxed position and do not activate any muscles in the arm
during measurement.