iGuard LM530, User Manual

Page: 17 / 80

iGuard™ LM530 Operation Manual
Version 1.0
- 12 -
Adding New User with Smartcard
Follow these steps to create a new user by issuing a new smartcard to the user:-
Description LCD Display
1. While in Standby Mode, press the Func key to enter the
Function Menu. Enter the System Administrator Password
(default 123) and press
Func key, then press 9 to select the
item
“Issue / Import Smartcard”.
Issue/Import
Card (1/2)? _
2. Enter 1
to select “Issue Card”. You will then be asked to enter
the User ID.
Enter ID #
_
3. Enter the user ID # (e.g. A01). The ID can be of any length
from 1 to 10 characters, including the letters A & B.
Enter ID #
A01_
4. Press Func key to continue. If the ID does not exist, you will
be asked to confirm to create this new ID.
Create new ID...
Yes/No (1/2)? _
5. Press 1 to select Yes , then the unit will prompt you to present
the Smartcard.
Waiting for
SmartCard...
6. Place a new Smartcard near the Keypad. Depending on the
selected smartcard mode, once the device has detected the
Smartcard, it will either update the card by writing the user
information to the card, or just assi
gn the smartcard’s serial
number to the user.
Writing...
:
Issue OK!
7. Once it has finished updating the card, the unit will ask for the
next user ID for issuing another Smartcard. Press
backspace to return to Standby Mode.
Thu Aug 30 13:28
ID #:_ IN
In
Full-Read-Write mode , all the available user information, including the user name,
personal password, access rights, and the fingerprint information (if any), will be written to
the Smartcard memory.
In
Serial-Number-Only mode , iGuard will only read the serial number of the smartcard,
and assign this serial number to the user, without writing any user information to the
smartcard.