iGrid T&D iGW Series, User Manual

Page: 36 / 47

─
Index
─
User Manual
18. iKernel version and update process
Figure 198 – iDevSetup menu: Update iKernel option (key “k”)
7) Press “y” to start the update process.
Do not disconnect the USB drive during the update process.
Do not remove the power supply during the update process.
8) During this process, the console shows some messages about the update status:
Figure 199 – iKernel update process
9) The update process is successfully done when the console shows the following message:
“ iKernelimageupdatedsuccessfully.Resettingdevice.....
Pleasewait... ..”
10) iRTU/iGW unit will restart.
11) When the iRTU/iGW unit initializes, check the
iKernel version by entering the command info in the
maintenance console.
iRTU, iGW & iRTUe Series
161