Ignition Pico 2 Wireless, Manual

Page: 4 / 12

2. Designated use
Every 3 weeks should be a regeneration charging
Regular breaks during operation increase the lifetime of your device.
Avoid convulsions or any form of forceful impact during the installation or the start
If you use fog devices the device has not be exposed to a direct smoke jet. There has to be a safety
distance of at least 0,5m between this device and the fog machine. Make
the fog has to enable a visibility of at least 10m.
Fire hazard!!
Make sure when installing the projector, that there are no flammable materials within a distance of at
least 0,2 m.
Operate the device not during thunderstorms.
power supply during thunderstorms.
Surrounding objects or surfaces should not be in contact with the device.
Make sure that during the installation and removal of the device the area below the place of
installation is basically cordoned off. This also applies to implementation of service.
The device has basically been protected by a suitable safety.
Make familiar yourself with the functions of the device before start
should not handle with the device. The most cause of functional disorder is inappropriate handling.
Do not use chemicals or volatile liquids for cleaning. Use a clean dry cloth to wipe off the dust, or a
wet soft cloth for stubborn dirt.
For transport use the original packing or designated accessory to avoid damages during the transport.
For reasons of safety unauthorized changes are forbidden.
A usage of the device which differs from usages which are described in this manual can cause
damages of the device. In that case the warranty expires. Additional you should notice that every
differed usage is related with dangers and can cause e.g. an electrical short, fire, electric shock or
crash.
4 / 12
regeneration charging to take place to avoid damaging
Regular breaks during operation increase the lifetime of your device.
any form of forceful impact during the installation or the start
If you use fog devices the device has not be exposed to a direct smoke jet. There has to be a safety
distance of at least 0,5m between this device and the fog machine. Make sure that the saturation of
the fog has to enable a visibility of at least 10m.
Make sure when installing the projector, that there are no flammable materials within a distance of at
Operate the device not during thunderstorms. Surge voltages could destroy the device. Unplug the
power supply during thunderstorms.
Surrounding objects or surfaces should not be in contact with the device.
Make sure that during the installation and removal of the device the area below the place of
stallation is basically cordoned off. This also applies to implementation of service.
The device has basically been protected by a suitable safety.
Make familiar yourself with the functions of the device before start-up. People without the experience
ld not handle with the device. The most cause of functional disorder is inappropriate handling.
Do not use chemicals or volatile liquids for cleaning. Use a clean dry cloth to wipe off the dust, or a
original packing or designated accessory to avoid damages during the transport.
For reasons of safety unauthorized changes are forbidden.
A usage of the device which differs from usages which are described in this manual can cause
that case the warranty expires. Additional you should notice that every
differed usage is related with dangers and can cause e.g. an electrical short, fire, electric shock or
to avoid damaging the battery.
any form of forceful impact during the installation or the start-up of the device.
If you use fog devices the device has not be exposed to a direct smoke jet. There has to be a safety
sure that the saturation of
Make sure when installing the projector, that there are no flammable materials within a distance of at
Surge voltages could destroy the device. Unplug the
Make sure that during the installation and removal of the device the area below the place of
stallation is basically cordoned off. This also applies to implementation of service.
up. People without the experience
ld not handle with the device. The most cause of functional disorder is inappropriate handling.
Do not use chemicals or volatile liquids for cleaning. Use a clean dry cloth to wipe off the dust, or a
original packing or designated accessory to avoid damages during the transport.
A usage of the device which differs from usages which are described in this manual can cause
that case the warranty expires. Additional you should notice that every
differed usage is related with dangers and can cause e.g. an electrical short, fire, electric shock or