Ignition Pico 2 Wireless, Manual

Page: 9 / 12

7. Trouble shooting
7.1. Pico 2 IR
The unit does not turn on.
Failure of one color
Failure of the projection.
Light yield reduced
Possible causes
x No power supply.
x x Defect LED.
x Empty battery of remote control.
x x Defect optics.
x x Dust or dirt.
x Defect remote control.
x x x Fault in the electronics.
x x Defect battery.
7.2. Tourcase
There is no charge
No charge status indicator.
State of charge indicator does not reach max.
Possible causes
x No power supply.
x Defect power supply
x x x Fault in the electronics.
x x Contact error of the XLR connectors.
x Contact error.
x x x Defect battery.
x x Switched on headlight.
9 / 12
Error
Failure of the projection.
Light yield reduced
causes Check and reaction
No power supply. Check the battery voltage
Change the defect LED.
Empty battery of remote control. Change the battery.
Contact qualified personnel.
Clean the device.
Defect remote control. Change the defect remote control.
Fault in the electronics. Contact qualified personnel.
Contact qualified personnel.
Error
No charge status indicator.
State of charge indicator does not reach max.
Possible causes Check and reaction
No power supply. Check the voltage
Defect power supply Contact qualified personnel.
Fault in the electronics. Contact qualified personnel.
Contact error of the XLR connectors. Plug the XLR connector again.
Contact qualified personnel.
Contact qualified personnel.
Switched on headlight. Switch the headlight off.
Error
Check and reaction
Check the battery voltage
Change the defect LED.
Change the battery.
Contact qualified personnel.
Clean the device.
Change the defect remote control.
Contact qualified personnel.
Contact qualified personnel.
Error
Check and reaction
Check the voltage
Contact qualified personnel.
Contact qualified personnel.
Plug the XLR connector again.
Contact qualified personnel.
Contact qualified personnel.
Switch the headlight off.