Total control, group work, and slave modes can be activated simultaneously, thereby giving space for
flexible settings of the devices and having complete access to all devices of the group, not interfering
into the work of other devices.
A quick way to switch total control mode is provided for. Being in timeline mode or single image mode,
press and hold both “UP” and “DOWN” buttons for 1 second. Blinking menu serves as a sign that the
mode has been switched: one blink
–
total control mode is off, two blinks
–
total control mode is on.
DMX support.
While operating the devices from remote control unit with the support of DMX-512 protocol, access to
all modes of the devices described above is available. Furthermore, there are two additional modes:
▪
performance preparation mode with all the buttons locked.
In this state the device expects from the remote control unit a command to launch, operation
from buttons is locked;
▪
Play mode with all the buttons locked.
In this state the device plays the mode given though the DMX control unit, operation from
buttons is locked.
To go out of these modes press and hold the “PLAY/STOP” button not less than 5 seconds until the
device shows the indication of being on/off .
Remark: operating from DMX control unit is possible only if group work mode is active.
