background image

To turn it off press and hold “PLAY/STOP” button not less than for 1 second. LEDs successively go out 

from top to bottom.  

 

After the turned off device is plugged in to the charger or a PC, the battery indicator lights up. The red 
indicator shows the device is being charged, the green indicator shows the devise is charged.  

To display the battery level press and hold the middle button of the turned on device for half a second 
until a battery level scale appears.  The current battery level is displayed as a red-to-green gradient.   

In menu mode select a required sequence (timeline) or a single image.  

Navigation over the menu is fulfilled by the “UP” and “DOWN” buttons, confirmation and launch of a 
selected mode is fulfilled by the “PLAY/STOP”

 button. Return to the menu is fulfilled  by repeated 

pressing the “PLAY/STOP” button. If a single image is being played, you can switch from one to another 
by repeated pressing the “UP” and  “DOWN” buttons, not returning to the menu.   

 

Mode selection is fulfilled by a blinking cursor: a blue light on the green background for timeline mode, 
and a red light with a green tail for the single image mode.    

When end positions in menu mode are reached, switching between timeline and single image modes 
occurs.  

 

 

Summary of Contents for Pixel v3











Reviews: