iGi Corp.
-‐ 2 -‐
i-Got-Control
™
Turning your iPhone
®
/ iPod
®
Touch into a Universal Remote is as easy as 1, 2, 3….
•
Simply connect the IRB1
Remote to the iPhone or iPod
Touch’s Dock Connector
located on the bottom edge.
•
When the iPhone
®
/iPod
®
touch is turned ON the IRB1’s
LED’s will blink Green.
•
If the Application has not
been installed, the iPhone or
iPod Touch will direct you to
iTunes App Store to download
and install the
i-Got-Control
remote App.
1. Connect
•
Once the
i-Got-Control
App
starts, click on the ADD button to
add a device.
•
Select the Device you want to
add using the Left selector wheel
(i.e. TV, DVD, Home Control –
Lights etc.).
•
Select the Brand of the Device
using the center selector wheel.
(i.e. Panasonic) or for faster
selection use the Scroll Bar at the
bottom.
•
Available IR Code Libraries for
your device will appear in the
right selector wheel.
•
Highlight the first code library and
hit the
Test Power
button. If this
code works press DONE to save
the device. If it does not work, go
to the next code set and repeat
until your device is found.
•
To automate this process, use the
START SEARCH button to
automatically test each
command set. Hit STOP SEARCH
when the device turns ON or OFF.
•
Repeat for all Devices
•
For devices not found in the
included Library, skip to the
section titled ‘Learning
Commands’.
2. Select
3. Control
•
You’re Done!!
•
Now Select the saved device
and
You’ve-Got-Control!
•
Two pages are loaded for
each device. To advance to
the next page simply swipe
from right to left.
•
To select a different device,
press the Home button on the
top of the page.
