3
IMPORTANT
When the heater is in use, it should always be kept vertical (handle should be at the top). Putting the heater in any
other position could be dangerous and cause a potential fire hazard.
Assembly
You will need to assemble the body frame and base plate together
Remove both the butterfly nuts (3) from the base plate
Insert the power cord through the hole in the middle of the base plate
Secure the base plate up to the body frame
Secure with the 2 butterfly nuts, previously removed
Fix the power cord in place by slotting it into the designated clips.
Location of the Heater
The heater should be positioned where you most need the warmth.
Do not locate the heater underneath a fixed power point.
Always ensure that the heater is placed at least 50cm away from furniture, curtains, walls etc.
Plugging in the Heater
Before plugging the heater into the mains, ensure that your supply voltage is the same as what is shown on the
rating plate of the heater. Try to avoid contact between the heater and clothes, household linen, furniture,
inflammable material and the power socket.
Turning on and Using the Heater
1. Insert the plug into a suitable socket ensuring the lead is neither near the heat source nor a tripping hazard
2. Select the number of halogen elements required, 1, 2 or 3, by pressing the buttons located at the top of the
heater.
3. The buttons operate the top, middle, and lower elements.
4. To make the heater oscillate press the turn button.
5. To make the heater stop oscillating press the turn button again.
IG9512
– 1.2kW Halogen Heater
Halogen Heater at a glance
1- Body frame
2- Base plate
3- Butterfly nut (2pcs)
4- Tip-over safety switch rod
5- Power cord