3
5. Ensure the Speed Selector is set to “0” Position, then plug the blender into the power socket and set Speed
Selector to your desired setting. You can set the Speed Selector to the “P” position if want to accelerate the process of
blending. The detailed information is shown in Fig. 2 below.
NOTE: Make sure the jug cover is placed in position correctly before operating, and never open the jug
cover during operation.
1
M
2
3
4
5
0
Pulse
To start pulsing, hold the
knob to this position
To stop pulsing, release
the knob
Stop
To stop the appliance at any time
set the knob to this position
Lowest
Highest
6. Do not run the appliance for more than 3 minutes at a time. Wait until the unit has cooled to room temperature
before performing next operation cycle.
7. Turn the Speed Selector to “0” Position once the mixture has been blended to your desired consistency.
8. Turn the jug anti-clockwise and remove it from the motor unit. Carefully remove the jug cover, then pour and serve.
CHOPPER OPERATION
1. Place the motor unit on a flat horizontal surface and make sure it is unplugged.
2. Insert the chopping blade onto the central post of bowl. Please see Fig 3
3. Place the chopping bowl on the motor unit, align the triangle with the word “UNLOCK” on
bowl base. Then turn the bowl clockwise until the triangle aligns with the word “LOCK”, a click
will be heard when locked into position properly. Please see Fig. 4
NOTE: There is a safety interlock device at the bottom of bowl, if the bowl is not
assembled in place, the chopper will not operate.
4. Fill the chopping bowl with the required ingredients, place the cover on the bowl, and then
turn it clockwise until locked into position. Please see Fig.5
NOTE: The quantity of food the chopping bowl allows to chop is Max 100g for fruits or
vegetables and Max 150g for meat.
5. Ensure the Speed Selector is set to the “0” Position, then plug into power socket.
6. Select the desired speed setting, the appliance will start chopping. During chopping, you can
set the Speed Selector to “P” position if want to accelerate the process of chopping.
Fig. 3
Fig. 4
Fig. 2
Fig. 3
Highest
Lowest
Stop
To stop the appliance at any time set
the speed selector to this position
Pulse
To start pulsing, hold the
speed selector to this
position
To stop pulsing, release
the speed selector
