14
5.2.2 Power connection
The device terminal strip is live during operation!!
Before working on the device disconnect it from the mains!!
If inductive equipment is connected, voltage peaks occur when switching off.
For this reason connected inductive equipment (e.g. contactor) must be
provided additionally with an RC circuit: e.g. 0.1µF / 100Ω.
The output contacts are only switched when both electronic circuits energise the
corresponding relays (Chap. 4.3)
Assignment plan:
Upper bar / contacts 1 ‒ 21
(for the output contacts the rest position is displayed)
:
When using only one 24V supply, contacts 1 and 2 must be bridged.
Alarm̲Out
Failure̲Out
