48
Backing Up Panel Setup Internally
The controller can create an internal backup of the controller setup file. This option is located in the
System menu. Select Backup from the system menu tab and backup options are indicated as
shown below.
If the controller was shipped with a factory configured alarm setup then the ‘as shipped’
backup will already be saved. This is indicated in the screen display shown above. This setup
can then be restored at any point by selecting ‘Restore Shipped’.
If the setup has been modified during commissioning then this setup can be saved
independently of the as shipped setup. In this case selecting ‘write User’ will save this
commissioned state as a backup.
Either of these setups are then available to be re-loaded at any time.
The backups can be erased by accessing the production menu.
